Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SVF12FRHW00

SVF12FRHW00 Whirlpool Freezer - Overview

Get Parts and Repair Help for SVF12FRHW00

If you know the freezer repair part you need, you can browse the list of all parts on the SVF12FRHW00, or you can search by name or part description. You can also find your part by where it is located on the SVF12FRHW00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for SVF12FRHW00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the SVF12FRHW00

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.22

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$11.53

CLIP

$5.02

Gate Support - Right Hand

SOCKET

$5.73

VENT-PLUG

$16.64

Gate Support - Left Hand

$14.42

Hinge Bushing

$5.74

PLUG-DRAIN

$61.30

INSULATION

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 172 of 190 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 66 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 20 of 27 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more