Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SU880RXR1

SU880RXR1 Frigidaire Dishwasher - Overview

Get Parts and Repair Help for SU880RXR1

If you know the dishwasher repair part you need, you can browse the list of all parts on the SU880RXR1, or you can search by name or part description. You can also find your part by where it is located on the SU880RXR1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for SU880RXR1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.03

Single Rack Roller Kit

The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not c...

Order within the next 16 mins and your part ships today!
$3.73

Heating Element Brass Nut

The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.

Order within the next 16 mins and your part ships today!
$6.09

Upper Dishrack Roller and Axle Kit

The upper dishrack roller and axel kit comes with two pieces, a wheel and an axle. This kit is made for your dishwasher. Both pieces measure to be roughly one square inch each, the...

Order within the next 16 mins and your part ships today!
$24.82

Door Gasket

This tub gasket, also known as a door seal, is used for dishwashers. This one-piece part provides a water-tight seal between the dishwasher tub and door to prevent water leakage. If you find your dishwasher is leaking or the door will not close, replacing the door seal can solve the issue. The measurement for this door seal is 90 1/4 inches long. Remember to unplug the dishwasher from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for installation instructions.

Order within the next 16 mins and your part ships today!
$18.30

Single Door Spring

NOTE: Sold individually. This door spring is four and a half inches long. It is used for some dishwashers. These springs tend to wear out at the same rate, so you should replace bo...

Order within the next 16 mins and your part ships today!
$6.92

Pan Head Screw

Sold Individually. Order quantity required.

Order within the next 16 mins and your part ships today!
$21.82

Upper Dishrack Track End Cap

Sold individually.

Order within the next 16 mins and your part ships today!
$33.22

ARM ASSY

Order within the next 16 mins and your part ships today!
$7.00

Access Panel Screw - Black

Sold individually.

Order within the next 16 mins and your part ships today!
$2.88

THERMOSTAT

Order within the next 16 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water leaking under the dishwasher

  • Customer: Dennis from Tryon, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench (Adjustable)
  • 66 of 69 people found this instruction helpful
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away... read more

Dishwasher leaked

  • Customer: Darren from Biddeford, ME
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 35 of 40 people found this instruction helpful
First I noticed that the old gasket had disintergrated along the bottom. Next I removed the the gasket being careful to observe how it was installed. There are these notched areas of the gasket that belong in the lower corners. I think the notches are designed to help hold the gasket in place and make the gasket bend around the corner. The gasket made cl... read more

Bad door gasket-leaking, broken door spring

  • Customer: Randy from Orlando, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 15 of 15 people found this instruction helpful
My door spring had broken and I was going to leave it until the door gasket failed and started leaking. After removing the parts, I got on-line and order what I needed. I found everything easier than I thought. I got the parts a few days later and put the gasket in first. Looking at it, you'll find theres slotted ribs at both ends. Those areas go in the bott... read more