SU24S9KTLA Gibson Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leaked Water
First I removed the old seal and comparied it with the new one and they were the same.
Then my wife put the new seal on. I helped her on the corners, very little. She did a very good job and it does not leak now.
Then my wife put the new seal on. I helped her on the corners, very little. She did a very good job and it does not leak now.
Parts Used:
-
Jack from Soddy Daisy, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
15 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Rinse cycle
Removed the front panel below door, 4 screws. Removed 1 screw that help relay on frame. Moved 3 wires from old relay to new. Installed relay to frame, installed panel and done.
Parts Used:
-
Tim from Forest Grove, OR
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problems encountered
There were 4 zip ties holding old silverware basket on to bottom rack snip them, remove basket install new basket with zip ties both ends 2 more in middle about 1-2” apart. Try to install ties about 1/2 way up on basket so it doesn’t get top heavy.
Parts Used:
-
Calvin from LOVINGTON, NM
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!