Below is a list of all parts for the Electrolux Washer STF7000FS0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
NOTE: As per the manufacture, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require t...
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.
This part is found on the door of your washer and keeps your door closed for use.
The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
This part attaches to the outside of the front door panel to help with the door open and closing properly.
This part comes with the sensor/thermistor.
Also known as tub-to-pump drain hose.
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.