If you placed an order on ApplianceHelp.com the order is still valid and you can check on its status and make changes here on PartSelect.com. Click here for more details.
Below is a list of all parts for the Westinghouse Washer STF2940HS1 - WASHER. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
Use with front load washers.
***NOTE: As per the manufacture, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance.
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorou...
This part comes with the sensor/thermistor.
The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
Also known as a Door Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub ...
Also known as tub-to-pump drain hose.
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2014 , Eldis Group Partnership. All rights reserved.