Models > STF2940HS0 > Parts

STF2940HS0 Westinghouse Washer - Parts

All parts for the Westinghouse Washer STF2940HS0

Below is a list of all parts for the Westinghouse Washer STF2940HS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the STF2940HS0
1-14 of 121
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Lock and Switch Assembly

NOTE: As per the manufacture, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require t...


Door Strike

Use with front load washers.


Shock Absorber Kit

This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorou...


Drain Pump - 120V 60 Hz

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.


Water Inlet and Dispenser Valve

This part comes with the sensor/thermistor.


Door Handle

Handle only.


Bellow Kit

Also known as a Door Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub ...




Door Hinge

Sold individually.


Spring-Held Bellow Clamp


Comb Flat Head Screw 8-18


Drain Hose

Also known as tub-to-pump drain hose.


Dispenser Drawer


Drum Vane

Sold individually.

All Parts for the STF2940HS0
1-14 of 121