Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SMV9165BC

SMV9165BC Microwave - Overview

Parts and Repair Help for models starting with SMV9165BC

If you know the microwave repair part you need, you can browse the list of all parts for models starting with SMV9165BC, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with SMV9165BC

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.82

Black Sleeve Diode

In your microwave, the diode allows current to flow one-way only, converting alternating current to direct current. If you notice that your microwave does not heat properly, you ma...

$4.89

Ceramic Fuse - twenty amp

This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave will not heat properly, will not turn on, or the touch pad becomes unresponsive, there could be a faulty fuse which should be replaced. Remember, since this part contains an electrical charge, before you replace the fuse from your microwave, make sure that the power is disconnected from the unit. This part is sold individually. NOTE: Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged.

$13.14

FILTER-AIR;SMH7175,AL-ME

This is a bottom-mounted air filter manufactured for a microwave. The microwave air filter filters the air flowing in and out of the microwave, and traps grease from the exhaust. A...

$23.12

Halogen Lamp - 20W 120V

This is a halogen lamp. It is used in conjunction with your microwave and it is 20 watts and 120 volts. The purpose of the lamp is to replace the bulb that lights the interior of the microwave and the surface below it. This piece is transparent with a male plug end, it measures to be roughly 1.5 inches long, and half an inch wide. Use caution when working on a microwave, as it can hold lethal electrical charges for long periods of time, even after unplugged. This model has been updated by the manufacturer, it may appear different than the original, but will still function the same and is a genuine OEM part.

$31.86

Micro Switch

This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. ...

$11.28

Light Lens Cover

$63.63

Turntable Drive Motor

This motor turns the glass tray for even cooking/warming.

$10.66

ASSY-HVD;HV03-12,MWO-

$9.40

Door Key

The microwave door key (or door latch) ensures that the microwave door closes properly while the microwave is operating. If the door key is broken, the door will not close and the ...

$6.89

THERMOSTAT;-,NT-101,250V

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Not the original type bulb

  • Customer: John from Orlando, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 19 of 23 people found this instruction helpful
The repair was very easy, however the bulb was not the same as the original one. The original bulb had a bright setting and a low setting, but the replacement bulb was only the low setting bulb. There was no bright and dim operation. The switch on the microwave had the duel settings. read more

microwave oven blew fuse

  • Customer: tad from tamarack, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 20 of 27 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

microve stopped working

  • Customer: Denice from Montgomery, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 10 of 16 people found this instruction helpful
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise read more