Models > SMH9187W/XAA > Instructions

SMH9187W/XAA Samsung Microwave - Instructions

All installation instructions for SMH9187W/XAA parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the SMH9187W/XAA
1-7 of 7
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door did not stay latched

  • Customer: Dianne from Danville VT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After removing the door from the OTR microwave, we slid out the old latch, slid in the new, & reattached the spring. Replaced the door & DONE.

Door latch broken

  • Customer: Susan from Pecatonica IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Used a putty knife to take off the edging inside the door to have access to the latch. Put the new part in and attached the spring. Replaced the edging and job was complete.

The door on microwave would not stay shut.

  • Customer: Cynthia M. from Edison NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Called Maytag regarding the latch. Was told I had to order an entire new door that would cost around $170 before shipping and handling. Went on partselect and foundt he part for $2.02. Big difference in price. Very easy to install. Hardest part was getting the spring back on. Would definitely recommend to friends.

Had to replace charcoal filter.

  • Customer: Calvin from Houston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Part arrived on March 15. When I went to install it on March 16 I found that it was the wrong size. On the same day I emailed PartSelect of the problem. They responded via email the same day and advised that the correct filter had be located and was being shipped. In addition, a separate e-mail had shipping instructions and an address label. On March 18 the part was returned and presently I am awaiting the replacement part. Todate I am well pleased with PartSelect's responsiveness and handling of the matter.

Cooking tray shattered

  • Customer: Valerie from Rock Springs WY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My daughter was trying to run the microwave timer and ended up nuking the cooking tray, which shattered. First web place I found wanted 55$ for this tray and this site sold it for 19.99. It shipped super quickly. I am very pleased with this company!

no power

  • Customer: Glenn from Pedricktown NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS

door latch broke off

  • Customer: Matt from Oswego IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Use knife to peel back molding around latch openings. Pull down on plastic latch part, pull out bottom and tilt up to remove broken part from spring. Tilt top of new part inward and connect tab to spring. Push in bottom of latch and snap. Replace the molding by pushing all around the door frame.
All Instructions for the SMH9187W/XAA
1-7 of 7