Models > SMH7159WC

SMH7159WC - Overview

Parts and Repair Help for models starting with SMH7159WC

If you know the repair part you need, you can browse the list of all parts for models starting with SMH7159WC, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with SMH7159WC

$3.22

Ceramic Fuse - 20 Amp

This ceramic microwave fuse is white in the center, while each end is made of metal. This is a twenty amp fuse.

$26.71

Micro Switch

$2.27

GLASS-COOK TOP LAMP;-,GL

$17.97

Microwave Light Bulb - 40W

$2.28

THERMOSTAT;-,NT-101,250V

$1.98

HOLDER-RACK;OTR-1.5CUFT,

$20.66

TRAY-COOKING;-,GLASS,T5.

$3.34

ASSY-HVD;HV03-12,MWO-

$17.98

Micro Switch

$1.98

FUSE-CARTRIDGE;250V,20A,

Common Symptoms of models starting with SMH7159WC[Viewing 2 of 2]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave oven blew fuse

  • Customer: tad from tamarack MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 16 of 22 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

microve stopped working

  • Customer: Denice from Montgomery AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 8 of 14 people found this instruction helpful
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise read more

Both bulbs burned out at same time

  • Customer: JOHN C from NORTH BEACH MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 22 people found this instruction helpful
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten read more