Models > SMH7159CC Maytag

SMH7159CC Maytag Microwave - Overview

Get Parts and Repair Help for SMH7159CC

If you know the microwave repair part you need, you can browse the list of all parts on the SMH7159CC, or you can search by name or part description. You can also find your part by where it is located on the SMH7159CC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.19

Ceramic Fuse - 20 Amp

This ceramic microwave fuse is white in the center, while each end is made of metal. This is a twenty amp fuse.

Order within the next 10 hrs and your part ships today!
$17.55

Microwave Light Bulb - 40W

Sold individually.

Order within the next 10 hrs and your part ships today!
$27.29

Micro Switch

Order within the next 10 hrs and your part ships today!
$2.02

HOLDER-RACK;OTR-1.5CUFT,

Order within the next 10 hrs and your part ships today!
$2.02

THERMOSTAT;-,NT-101,250V

Order within the next 10 hrs and your part ships today!
$22.52

TRAY-COOKING;-,GLASS,T5.

Order within the next 10 hrs and your part ships today!
$2.98

GLASS-COOK TOP LAMP;-,GL

Order within the next 10 hrs and your part ships today!
$3.68

ASSY-HVD;HV03-12,MWO-

Order within the next 10 hrs and your part ships today!
$3.23

SOCKET-LAMP;-,OTR7,-,250

Order within the next 10 hrs and your part ships today!
$2.02

ASSY HOLDER-NUT;OTR6

Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave oven blew fuse

  • Customer: tad from tamarack MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 17 of 23 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

microve stopped working

  • Customer: Denice from Montgomery AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 9 of 15 people found this instruction helpful
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise read more

Both bulbs burned out at same time

  • Customer: JOHN C from NORTH BEACH MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 26 people found this instruction helpful
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten read more