Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SGS395XX0

SGS395XX0 Roper Range - Overview

Get Parts and Repair Help for SGS395XX0

If you know the range repair part you need, you can browse the list of all parts on the SGS395XX0, or you can search by name or part description. You can also find your part by where it is located on the SGS395XX0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for SGS395XX0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$46.04

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

$65.41

Flat Style Oven Igniter

This igniter is lighted by the spark switch to produce a flame to ignite the oven.

$47.41

Light Switch

This light switch is located in the door of the oven.

Gas Valve

This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

$35.78

Gas Valve Burner Orifice - #58 LPG

Top Burner

$128.43

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$41.25

IGNTR-SURF

Selector Switch

This switch selects between the oven settings.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 60 of 64 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

ignitor glowed but did not ignite

  • Customer: james from long beach, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 17 of 25 people found this instruction helpful
took oven base plate out. diconnected ignitor , put new clips on neutral wire as per instructions, inserted new ignitor, put everything back, worked ok. read more

hard to get old one out

  • Customer: robert from chatham, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 27 of 61 people found this instruction helpful
easy to put in read more