Models > SGR641HS0 > Instructions

SGR641HS0 Westinghouse Dryer - Instructions

All installation instructions for SGR641HS0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dryer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the SGR641HS0
346-360 of 374
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

drum would not turn

  • Customer: Paula from Tryon NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Opened top and screwed the front off. Put belt around drum. It took two times as my sweet husband put the belt on backwards the first time.

The door safety or something needed replaced.

  • Customer: jane from blairsville GA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I called a wonderful friend who diagnosed the problem; ordered the repair part; and fixed it!!!

My dryer was squealing, which we ignored for awhile, then the dryer was beginning to have trouble turning.

  • Customer: Jennifer from Cincinnati OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the video on your site which was very helpful and informative. The one thing that proved to be more difficult than it appeared in the video was reengaging the belt. Every time we tried to do it in the way the video showed, the tensioner arm would come off. The belt was very tight, even with that arm pulled back. We ended up just putting the drum part way in and then putting the belt on the arm and motor, and then stretching it over the drum. Perhaps because it was new, it was so tight. The rest was a breeze. Just followed the video. Was quoted $310 for this repair and I did it for $40! Thanks for your help and website! What a break in a terrible economy. You helped us out!

Heat would come on but not stay on.

  • Customer: Stephen from Plymouth IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Flame Sensor didn't fix it but, it was easy to replace. Unplug electric. Lift up the top and remove wires from switch and light switch. Remove screws that hold on the front and remove front panel by lifting up and out. Sensor is on the left side of the burner, held on with just one screw. EASY!

old one broke

  • Customer: Anthony from Cranston RI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Put a new one on. Just slid it on. However ive had to replace all the knobs now. was cheaper to buy a new dryer with the cost of new parts and shipping. However I was happy with part select. they had the part and i had it in less than 36 hours. Thanks

Selector knob broke

  • Customer: Helen from Walden CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Opened package. Removed part from plastic bag. Put part on washer. (Thanks for sending it so fast.)

Broken drive belt

  • Customer: Thomas from Woodland ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Raised the lid, removed 2 little screws,slipped the front panel off, disconnected the safety switch, vacuumed everything, slipped on the drive belt and reversed my way out. It was way more easy than filling a grease gun!

Broken belt

  • Customer: John from Minot ND
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Remove drum, replace belt, return drum

Cut belt

  • Customer: gary from little torch key FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the vidio from yor web site it was great without it i would still be trying to get done.

The Knob was Broken

  • Customer: Michael from Kernersville NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
No real repair. The part of the knob that connected to the dryer was cracked. Therefore, the knob would not turn. The key was we found the exact part easily on this site, it was in stcok and we got it within 4 days. The transaction was great. Only bummer was the shipping cost was as much as the knob.

The Dryer would not lite

  • Customer: Thomas from Hixson TN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took the coils off and put the new one on thats all

Two knobs were cracked and I had already replaced one or two of them before. They seem to crack very easily.

  • Customer: Blanche from Mansfield PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just pulled the broken knobs off and pushed the new ones on. Very easy!!!!!

dryer belt broke

  • Customer: Veronica from Grand Ledge MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Installed just like the video described and it went quite well. The part arrived in a short amount of time and the belt was exactly what I needed.Thank you I will visit your web site again. A very satisfied customer. :) Veronica G.

A loud squeeling sound

  • Customer: Delbert from Grass Valley CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Had the macnine apart before ordering the Bearing Assembly. Reading other comments convinced me to order the Bearing Assembly. Parts were shipped very quickly after ordering and following the instructions on the web site things went back together easily.

Dryer was squeaking loudly.

  • Customer: Tim from Sulphur LA
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
followed the video instructions....easy as pie. Glad i bought the belt too....the belt on my dryer was very worn. Changed the bearing with the kit. Very easy to do. The whole job was done in an hour and a half....back together and running without the squeak. Glad i repaired instead of buying a new dryer. Next time i have a problem with an appliance, i will be checking PartSelect first.
All Instructions for the SGR641HS0
346-360 of 374