Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SGP335XW0

SGP335XW0 Roper Range - Overview

Get Parts and Repair Help for SGP335XW0

If you know the range repair part you need, you can browse the list of all parts on the SGP335XW0, or you can search by name or part description. You can also find your part by where it is located on the SGP335XW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for SGP335XW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for SGP335XW0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Cover Screw

Sold individually.

$6.18

Screw, 10-16 x 1

This screw is sold individually.

$24.04

2 Piece Broiler Pan

This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high tem...

$3.02

Screw

This screw is sold individually.

$25.32

Insulation

This insulation is also known as oven wrap insulation, and is used in conjunction with your range. Its purpose is to be installed in between the oven and the cabinets that surround...

$40.15

Suface Burner Ignition Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$22.90

Top Burner Spark Igniter

Also known as a spark electrode.

$8.10

Screw - #10 - 32x1/2

Sold Individually.

$4.92

Thermostat Bulb Clip

$29.57

Side Oven Door Seal

This single oven door side seal is fourteen inches long. It is made of black rubber and it has a metal hook in each end.

Common Symptoms of the SGP335XW0

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven seals got dried and cracked

  • Customer: Brent from Goleta, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 21 of 29 people found this instruction helpful
The top seal was too long (my fault, ordered wrong length seal) so I had to cut it and high-temp epoxy the metal hook into the end. Overall pretty easy fix. read more

Ignitor did not spark when turning the know

  • Customer: Richard from Lansing, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 10 people found this instruction helpful
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light... read more

The Oven Would Not Light

  • Customer: RICHARD from GLOVERSVILLE, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 17 people found this instruction helpful
Removed the defective igniter, removing one screw and disconnected wire, replaced new ignighter in reverse fashion. And WELLA! The old oven works again!! read more