Models
>
SF367PEYB1
SF367PEYB1 Whirlpool Range - Overview
Sections of the SF367PEYB1
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$11.73
In Stock
Flat Style Oven Igniter
PartSelect #: PS389156
Manufacturer #: 814269
This igniter is lighted by the spark switch to produce a flame to ignite the oven.
$115.36
In Stock
Thermostat Knob
PartSelect #: PS369025
Manufacturer #: 4371658
This knob accepts a D-shaped shaft.
No Longer Available
Thermostat Knob
PartSelect #: PS11742443
Manufacturer #: WP4371677
This knob accepts a D-shaped shaft.
$37.74
Special Order
Rocker Switch - Black
PartSelect #: PS11742364
Manufacturer #: WP4314961
This rocker switch can be used for both the oven selector and/or the oven light.
$72.51
In Stock
Surface Burner Knob
PartSelect #: PS369043
Manufacturer #: 4371685
Sold Individually. This knob accepts a D-shaped shaft.
NOTE: This knob is no longer made with a chrome ring.
No Longer Available
Oven Igniter
PartSelect #: PS11747123
Manufacturer #: WP9751123
This part ignites the gas to light the oven burner
$130.49
In Stock
Clock Knob
PartSelect #: PS389510
Manufacturer #: 816480
This black plastic clock knob is sold individually.
No Longer Available
Oven Selector Knob
PartSelect #: PS369024
Manufacturer #: 4371657
This knob accepts a D-shaped shaft.
No Longer Available
Oven Selector Knob
PartSelect #: PS369035
Manufacturer #: 4371676
This designer white knob accepts a D-shaped shaft.
No Longer Available
Questions And Answers for SF367PEYB1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the SF367PEYB1
[Viewing 3 of 3]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ignitor glowed but did not ignite
took oven base plate out. diconnected ignitor , put new clips on neutral wire as per instructions, inserted new ignitor, put everything back, worked ok.
Parts Used:
-
james from long beach, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
22 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter turned red but oven would not light
Remove broiler pan, disconnect wires from igniter to gas safety valve and connection in back corner of stove, under a metal plate held in with one screw. Remove two screws holding igniter in and take it out. With new igniter, cut neutral wire as per instructions with it, attach electrical clips to the wire ends, install the new igniter wi
... Read more
th the two screws, plug in the two wire clips to the safety valve just below the igniter and plug in the plastic clip with both wires going into it over in the corner of the stove, and replace the cover over that connection with the one screw, which you removed at the beginning of this process, and you're done.
Read less
Parts Used:
-
Dwayne from Mesquite, TX
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
15 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat,no gas smell,no glowing ignitor
Remove diffusers in bottom of oven,remove two screws that hold ignitor in place.Pull oven out, to access back of oven,remove three screws holding vented panel in place.Remove panel,find wires coming from ignitor,pull connectors apart and remove old ignitor.Install new ignitor in reverse order.Too bad for my wife it works fine now,she had
... Read more
a new oven/range picked out!
Read less
Parts Used:
-
todd from minneapolis, MN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!