Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SEG196W Maytag > Parts

SEG196W Jenn-Air Range - Parts

All parts for the Jenn-Air Range SEG196W

Below is a list of all parts for the Jenn-Air Range SEG196W - Slide-in, Electric-Gas Combo. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SEG196W
57-70 of 244
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$24.16

Rivet

This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.

$19.48

Leveling Leg

This is an OEM part that is made of metal and sold individually. The leveling leg is generally used with refrigerators, dryers, freezers, ranges, cooktops, and microwaves. The leveling leg is meant to keep your appliance steady and level to the floor. If you notice your appliance is uneven to the floor it may need to have the leveling leg replaced. You will notice that the bottom of the leveling leg has a smooth surface to ensure moving your appliance does not require as much effort. This part screws into a pre-drilled hole underneath the appliance.

Push Nut

This push nut is well under an inch in diameter. It is made entirely of metal.

Air Inlet Grill

White in color.

$10.25

Screw

This screw is sold individually.

$6.04

Screw

Sold individually.

Oven Door Handle End Cap

This end cap is just under two inches long. It is white in color and is made of plastic. Two of these end caps are required for an oven door, but they are sold separately.

Hose Clamp

This clamp is made of a thin, flexible metal.

$5.40

SCREW

Sold individually.

$2.90

Screw

This band screw is sold individually.

Gas Burner Valve With Mounting Screw - Left Side

Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for ignition.

Electonic Clock Assembly

This digital electonic clock assembly is seven and a half inches long. If you are installing this clock into a wall oven, the metalllic support nut on the center switch is not needed. You will have to remove the nut for control panel clearance. However, if you are installing this clock in your range, do not remove the center nut. This clock assembly comes with an instructions sheet and is used for many ranges and wall ovens.

$6.28

Screw

Model Number GB2526REKS : SCR

Clip Catch Spring - Female

All Parts for the SEG196W
57-70 of 244