All Installation Instructions for Whirlpool Cooktop SCS3614LS0

Top burners would not light. No "clicking" .

My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!

Parts Used:

Spark Module

Carolyn from Bellingham, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

21 of 33 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

gas burners would not automatically light when gas turned on

I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as she had been using matches and burning her finger tips,since the original range part malfunctioned. The only problem was the small screw from the original installation was not long enough , so it required some changes to get it affixed to the cabinet side.Thanks for the reasonable price and the right part for the job!!

Parts Used:

Spark Module

MICHAEL from LONGVIEW, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

12 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One of the burners was not igniting.

We replaced the part. It was pretty quick and easy to install.

Parts Used:

Spark Module

Sandra from ASTORIA, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Spark Module malfunction, won't spark

Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in the same slot number. Works fine.

Parts Used:

Spark Module

Darrel from Kewaunee, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Peeling paint grate

Remove old grate place new grate on gas stove top

Parts Used:

Grate Kit

Patricia from OLYMPIA, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

burner grates were very scaley(rough)

exchanged old with new

Parts Used:

Grate Kit

joseph from YONKERS, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Worn out spring assembly in valve.

This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight forward.

Parts Used: