Models > SCS3014GQ1 > Instructions

SCS3014GQ1 Whirlpool Cooktop - Instructions

All installation instructions for SCS3014GQ1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the SCS3014GQ1
1-7 of 7
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner grates crumbling from use and age.

  • Customer: Fredrick from Rockford MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 14 people found this instruction helpful
Replaced the grates. Very pleased. Great service, correct parts, happy customer.

Stove top did not come with a gas regulator and nipple attachment

  • Customer: Linda from Colorado Springs CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 9 of 28 people found this instruction helpful
A plummer did the repair.

Worn out spring assembly in valve.

  • Customer: Stephen from Ladera Ranch CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight forward.

change over from Natural Gas to LP and install cooktop from Electric to gas

  • Customer: Dan from Olalla WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.

Burner Grate coating was damaged

  • Customer: Joseph W from Anaheim CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Remove old grate and replace with new one.

the small burner cap was dropping pieces of grasy finish from around the edge....it wass either overheated from being left on or dropped on the tile floor

  • Customer: Lois from Tower MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
found the model number on the stove, found the numbers incised on the part, found the part on your website, and double-checked by phone before ordering....it is a quality replacement part

Replaced a stove burner grate

  • Customer: Robert from Oakton VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
No tools necessary. Shipment was extremely quick; I was very pleased.
All Instructions for the SCS3014GQ1
1-7 of 7