Models > SCA1000DWW03 > Instructions

SCA1000DWW03 General Electric Microwave - Instructions

All installation instructions for SCA1000DWW03 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the SCA1000DWW03
76-82 of 82
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken latch hook

  • Customer: David from Pittsburgh PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed. Inside frame with putty knife replace new latch attach spring and line up notch of latch in slots. That was the most difficult part replace inside frame. Done!

Broken microwave glass tray

  • Customer: Frank from Arlington VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Placed the new tray in the microwave.

The handle broke off where the screws enter the handle

  • Customer: Lou from Monarch Beach CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
This seems to be a fairly common occurrence so I've repaired this multiple times, once a year on average. The on site instructions are clear. Lift the top vent area off so you can remove the door. Open the door all of the way, lift off of the bottom peg and pull from the top. Lay door on a flat surface and with a small flat head screwdriver, gently pry the frame up (part 1804, door chock cover). There are small plastic tabs holding this part: use caution as they break easily. Once removed, on the door assembly, remove the small Philips screws: push the plastic tabs back, one side first; this part should then slide out. Both door handle screws are the exposed. Remove these (probably holding the broken handle parts, use the small screwdriver for lift to remove parts). Place the new handle on the door and replace the screws. replace the door assembly, be sure to lock all of the tabs back in place, snap door mask in place, replace door.

Change a burnt out bulb

  • Customer: George from Fort Myers FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Opened the lid over the bulb by removing one screw. Removed old bulb; a bayonet type with delicate prongs. Inserted new bulb. Best to turn off circuit breaker toi the micro for safety reasons.

Broken plsastic

  • Customer: Brian from Lakewood WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Plastic broke off where the screws are inserted.

The Vent Grill Tabs that hold up the vent Broke

  • Customer: Steven from Cerritos CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The Vent Grill came off when the two Tabs crack and broke off. The New replacement from PartSelect arrivied. Took the part out of package and replaced the two screws on top of the Vent. Had to push the Vent in to align the first screw. Pushed the side of the vent to align the Tab and put the second screw in. The fit was perfect

Microwave would turn on ,BUT turn table would not turn and oven would not heat.

  • Customer: Earl from New Philidelphia OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!
All Instructions for the SCA1000DWW03
76-82 of 82