Models > S166B-C

S166B-C Jenn-Air Range - Overview

Get Parts and Repair Help for S166B-C

If you know the range repair part you need, you can browse the list of all parts on the S166B-C, or you can search by name or part description. You can also find your part by where it is located on the S166B-C by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for S166B-C parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the S166B-C [Viewing 4 of 4]


Light Bulb - 40W

Sold individually.



This screw is sold individually.





This screw is sold individually.


2 Piece Broiler Pan


Bake Element - 240V

This bake element has screw-in wire terminals. It's located on the bottom of the oven.


Door Seal

This oven door seal prevents heat from escaping the oven cavity when in use.


Oven Rack

Sold individually.


Ceramic Receptacle

This cartridge receptacle is not sold with any wires or clips.


Single Grill Grate - Black

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The oven door seal was ripped and was leaking.

  • Customer: Paul from Mickleton NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 42 of 43 people found this instruction helpful
The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed part... read more

Seal rap around oven door window was separating from its frame.

  • Customer: Lester from Torrance CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 14 of 16 people found this instruction helpful
The frame and window were supplied as a completed assembly. About 4 other panels had to be removed prior to installing the new window assembly. This was easy to do with a screwdriver removing about 16 screws and then replacing all panels back in place after replacing the new window assembly. No instructions were supplied with the part, but anyone with a ... read more

My oven would broil but not bake.

  • Customer: M Lynette from Pawling NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 7 of 7 people found this instruction helpful
First, I made sure the circuit breaker was off to the oven. Next, I removed the two screws that hold the element in place , pulled the element out a few inches and eased the wires apart at the metal connectors. I eased in the new wires, put the two screws back in, and voila. In under five minutes, the oven was fixed. read more