Models > RXS214 Maytag

RXS214 Caloric Oven - Overview

Get Parts and Repair Help for RXS214

If you know the oven repair part you need, you can browse the list of all parts on the RXS214, or you can search by name or part description. You can also find your part by where it is located on the RXS214 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$54.31

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

$10.91

Clock Knob

This clock knob does not come with a tension spring insert.

$23.57

Oven Control Knob

$2.70

Frame Screw

Sold Individually.

Clock Knob

This clock knob is less than an inch long. It is black in color and is made of plastic. This knob has a piece of decorative chrome on its top.

Gas Valve

This gas oven safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range. This valve has a 3/8 of an inch inlet flare as well as a 3/8 of an inch outlet flare, and should be used in conjunction with a flat style oven igniter.

$175.73

Oven Thermostat - Screws NOT Included

This part establishes and maintains the internal temperature of the oven cavity.

RXP OVEN BURNER *

DISCONTINUED

KNOB LIGHT SWITCH

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 40 of 41 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

Oven ignitor stopped working (does this every 6-7 years)

  • Customer: Jean from Manalapan NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 8 of 9 people found this instruction helpful
First we removed the oven doors. Then removed the shelf that separates the oven from the broiler, giving us more room to work. At first we thought we needed to loosen the screws around the bracket holding the ignitor, but we realized that the burner needed to be removed. Lifting the burner up from the front gave us the room to pull it gently from the back... read more

Oven would not light

  • Customer: Rick from Laguna HIlls CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 7 of 7 people found this instruction helpful
After the appliance store told me that the repair would cost about $500 to fix an oven that wouldn't light we didn't have the money to repair it or buy a new one so we went without an oven (only the oven) for almost 1 year. The igniter would glow but the oven would not light. my son found your site online and passed it on to me. It was so simple it's almost ... read more