Models > RVM225BL01

RVM225BL01 Hotpoint Microwave - Overview

Get Parts and Repair Help for RVM225BL01

If you know the microwave repair part you need, you can browse the list of all parts on the RVM225BL01, or you can search by name or part description. You can also find your part by where it is located on the RVM225BL01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RVM225BL01 [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.98

Light Bulb - 40W 130V

Sold individually.

$11.54

Light Socket - 250V 75W

$19.43

Secondary Door Switch

$17.73

Monitor Door Switch

$2.14

Grille Screw

Microwave Rack Support

$94.18

Door Handle

The screws are sold separately.

$30.11

Grease Filter

$20.09

Hood Damper Frame

This is now ONLY the frame. The damper cover is sold separately.

$23.50

Thermostat Cut-Out

Also known as Thermostat or Humidity Sensor for Fault Code.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The handle came off. The door handle screws broke

  • Customer: Ray from Sugar Land TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 362 of 363 people found this instruction helpful
Easy replacement.!I used the tip of the screw driver to remove all the broken parts from the microwave. Cleaned the screw path and screwed the nuts into the handle. read more

Light bulb out, tried to remove, lamp socket broke

  • Customer: Gene from Urbana IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 65 of 74 people found this instruction helpful
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged the wires and took it... read more

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 62 of 73 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more