Models > RVM1325WW02

RVM1325WW02 Hotpoint Microwave - Overview

Get Parts and Repair Help for RVM1325WW02

If you know the microwave repair part you need, you can browse the list of all parts on the RVM1325WW02, or you can search by name or part description. You can also find your part by where it is located on the RVM1325WW02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RVM1325WW02 [Viewing 2 of 2]

$5.84

Light Bulb - 40W 130V

Sold individually.

$11.54

Light Socket - 250V 75W

$19.43

Secondary Door Switch

$8.54

Glass Light Lens

$1.46

SCREW (M4 X L12)

SCREW (M4 X L12)

$58.91

Door Handle

Screws are NOT included with this white door handle.

$17.73

Monitor Door Switch

$41.91

Aluminum Grease Filter

This aluminum filter collects grease particles in the air from cooking. Sold individually.

$20.09

Hood Damper Frame

This is now ONLY the frame. The damper cover is sold separately.

$110.00

Rectangle Glass Tray

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 92 of 112 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more

Light bulb out, tried to remove, lamp socket broke

  • Customer: Gene from Urbana IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 84 of 94 people found this instruction helpful
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged the wires and took it... read more

Unit worked fine except it would not heat

  • Customer: Roy from Colorado Springs CO
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 65 of 68 people found this instruction helpful
Had to take unit off wall and disassemble the main casing.then disconnected the wires from the magnetron.took the mounting nuts off but wasn't able to remove the magnetron until I loosened the transformer out of the way .Then it came out easy.Installed the magnetron ,tightened the nuts,installed the transformer back in, connected the the wires back on and... read more