Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RVM122K01

RVM122K01 Hotpoint Microwave - Overview

Get Parts and Repair Help for RVM122K01

If you know the microwave repair part you need, you can browse the list of all parts on the RVM122K01, or you can search by name or part description. You can also find your part by where it is located on the RVM122K01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RVM122K01

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.98

Light Bulb - 40W 130V

This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside o...

Order within the next 9 hrs and your part ships today!
$21.50

Secondary Door Switch

The secondary door switch is a simple on/off mechanism that stops the microwave from operating when the door is open. The switch monitors the door latch position, and communicates whether the door is open or closed to the electrical control board. This door switch is approximately 1 inch long, and has 2 metal prongs called terminals that extend out of its body. Common symptoms related to a faulty secondary door switch include: microwave will not turn/shut off, or the microwave will not heat properly. NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged. A capacitor stores large amounts of electricity even when your microwave is unplugged.

Order within the next 9 hrs and your part ships today!
$3.29

Light Socket Screw

This screw is sold individually.

Order within the next 9 hrs and your part ships today!
$69.14

High Voltage Diode

This diode has a 1/4" female connection and an eyelet.

Order within the next 9 hrs and your part ships today!
$5.41

Ceramic Fuse - 15 Amp

Order within the next 9 hrs and your part ships today!
$28.53

Grease Filter

This metallic vent hood filter collects grease particles in the air from cooking. This filter is also removable for cleaning.

Order within the next 9 hrs and your part ships today!
$18.16

Vent Thermostat

The thermostat opens and closes if it gets too hot to run the vent fan.

Order within the next 9 hrs and your part ships today!
$138.69

Magnetron

This part is used to generate microwave energy/heat.

Order within the next 9 hrs and your part ships today!
$72.17

High-Voltage Capacitor - 2100V

Order within the next 9 hrs and your part ships today!

Microwave Rack Support

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 217 of 247 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more

bulb had broken off in base that was still screwed into socket

  • Customer: william from san antonio, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 78 of 82 people found this instruction helpful
At first I tried to use pliers to unscrew the base,very uncomfortable working position,upside down and backwards(the microwave is installed over the range top)very limited space for your body and arms to manuver and you really cant see the base,all of this took place after the breaker was turned off ofcourse,finally figured out that you can drop the entire b... read more

Turntable won't move, no heat -but light and fan ok.

  • Customer: Sean from San Jose, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 39 people found this instruction helpful
Remove the 2 Torx-15 screws at left of control panel. Work the control panel out by pulling slightly to the left first - it is engaged to the slotted holes to the right.

Remove the door's upper switch by lifting the tab and pulling out the switch carefully. To install the new switch, you may have to remove 2 philips screws holding the plastic asse... read more