Models > RUD3000HQ0

RUD3000HQ0 Roper Dishwasher - Overview

Get Parts and Repair Help for RUD3000HQ0

If you know the dishwasher repair part you need, you can browse the list of all parts on the RUD3000HQ0, or you can search by name or part description. You can also find your part by where it is located on the RUD3000HQ0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for RUD3000HQ0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$14.21

Upper Dishrack Roller Assembly

Sold individually.

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$45.48

Door Gasket

It provides a waterproof seal between the tub and the door.

$3.51

Lid Spring

This metallic spring is for your dishwasher's soap cup cover.

$3.76

Soap Cup Latch Kit

This latch kit is for the soap cup door of your dishwasher.

$3.51

Rinse Aid Cap

This cap does not require the use of a o-ring seal.

$2.70

Hose Clamp

$3.76

Lid Hinge Pin

$5.25

Touch-Up Paint - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher leaking at bottom of door

  • Customer: Eileen from Salt Lake City UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 66 of 67 people found this instruction helpful
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked.
Verified that manifold bearing was not work. It was OK.
Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was thouroughly plugged wit... read more

Door Gasket was bad causing a water leak

  • Customer: Edward from Springfield NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 31 of 33 people found this instruction helpful
This repair was very simple. I opened the door of the dishwasher then pulled the old rubber seal (gasket) out; I checked the old gasket to with the new one to ensure the new one was correct then installed the new one. There are two small rubber pieces located in mounting slots below the door gasket that slide out; I slide the old ones out and slide the new o... read more

leaking water

  • Customer: mary from Fountain Green UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 33 of 39 people found this instruction helpful
The first thing I did was to investigate. I needed to find where the leak was coming from. It was leaking from just above tne door front panel, directly underneath the control panel buttons. I opened the dishwasher door, and decided to remove the door screen vent. I was covered with some offwhite fiberous, or filter like material. I thought perhaps the filt... read more