Models > RUD3000DB2 > Parts

RUD3000DB2 Roper Dishwasher - Parts

All parts for the Roper Dishwasher RUD3000DB2

Below is a list of all parts for the Roper Dishwasher RUD3000DB2 - Undercounter. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RUD3000DB2
15-28 of 149
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Soap Dispenser Cover

This part covers your soap dispenser and is spring loaded.


Door Switch Kit

This kit comes with 2 micro switches and a wire harness.


Upper Dishrack

Dishrack ONLY. Wheels NOT included,


Impeller and Seal Kit

This kit contains Impeller and Bearing Assembly.


Door Panel Insert

This panel is reversible, black on one side, white on the other side.


Door Latch Bolt


Water Deflector

This part is located in the lower front corners of the dishwasher tub. They keep the water away from the corners of the appliance and therefore eliminating the rush of water behind...



These detergent cup dispenser springs are sold individually.


Lower Spray Arm with Tower

This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spr...


Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".


Drain Hose with Connector Ends

This hose is used to drain the water into your sink.


Hex Nut

Part may differ in appearance, but functions same as original.


Spring Bearing

Sold Individually. This is what your door spring would hook into and it prevents the metal spring from rubbing against the metal on the side of the door.


Thermal Fuse

This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance.

All Parts for the RUD3000DB2
15-28 of 149