LIght switch on oven door was broken
- Customer: James from Sequim, WA
- Difficulty: Easy
- Time to Complete: Less than 15 mins
- Tools Required: Screw drivers
- 1 of 2 people found this instruction helpful
Turned off power at circuit breaker. Removed 4 phillips screws from area over oven door. Pulled control panel out and twisted to clear top rail. Pulled two wires off of old switch.Pulled old switch through panel. Inserted new switch. Attached the two wires to new switch. Replaced panel and inserted four screws. Turned on power - it works!