Models > RT21LMXKQ03 > Parts

RT21LMXKQ03 Roper Refrigerator - Parts

All parts for the Roper Refrigerator RT21LMXKQ03

Below is a list of all parts for the Roper Refrigerator RT21LMXKQ03 - Top freezer, Top-mount. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RT21LMXKQ03
1-14 of 206
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mountin...


Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.



This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.


Condenser Fan Motor Kit

This kit includes the motor, fan blade, wire harness and screws. NOTE: The manufacturer has changed the product to appear different than the original, but will still function the same as the original part. It is an OEM factory replacement.


Bimetal Defrost Thermostat

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.


Evaporator Fan Motor - 60Hz 120V

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. NOTE: This motor uses 2 brackets which are sold separately.


Single Water Inlet Valve - 120V 60Hz 35W

Also known as a Water Solenoid Valve. The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into th...


Light Rocker Switch

This light switch is triggered by the door opening and closing.


Meat Drawer

Sold individually.


End Cap Trim Piece

Sold individually.


Door Shelf Retainer Bar End Cap


Water Fill Cup and Bearing


Door Shelf Retainer Bar

End caps are sold separately.


Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

All Parts for the RT21LMXKQ03
1-14 of 206