Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RT21AKXKQ03

RT21AKXKQ03 Roper Refrigerator - Overview

Get Parts and Repair Help for RT21AKXKQ03

If you know the refrigerator repair part you need, you can browse the list of all parts on the RT21AKXKQ03, or you can search by name or part description. You can also find your part by where it is located on the RT21AKXKQ03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RT21AKXKQ03 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$86.04

Condenser Fan Motor Kit

This kit includes the motor, fan blade, wire harness and screws. NOTE: The manufacturer has changed the product to appear different than the original, but will still function the...

$7.20

Touch-Up Paint - White

18ml

$35.17

Light Socket Kit

The bulb is sold separately.

$97.31

Fresh Food Door Gasket

This misty beige door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$11.07

Spray Paint - 12 oz. - White

$7.20

Touch-Up Paint - .6fl Ounce - Biscuit

$6.60

Touch-up Paint - Black

16ml

$101.80

Freezer Door Gasket

This magnetic freezer door gasket seals the freezer door when closed and is misty beige in color.

$7.16

SHIM

$29.51

Evaporator Drip Tray

This part catches water during the defrost cycle.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The frost free feature of the freezer was freezing over with ice and cooling coils were being insulated with thickening frost which caused the cooling air to rise in temperature from -5 degrees to 20 degrees.

  • Customer: Lawrence from Grahamsville, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 324 of 380 people found this instruction helpful
I troubleshot the problem by reading the electrical schematic and concluding the heating elements (defrost cables) were either defective or the bi-metal temp sensor was open. When closed the temp sensor completes the circuit for the current to flow through the heaters to defrost the cooling coils every 8 hours and then when the bimetal opens at 55 degrees t... read more

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 176 of 196 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Seven year old condenser fan was making noise when it was running.

  • Customer: Josue from Jacksonville, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 154 of 160 people found this instruction helpful
The process to repair was very simple, I removed the back of the refrigerator to expose the motor area. I then removed three screws that held the condenser motor in place. once it was loose I detactched the electrical harness and removed the old motor. I then placed the new motor in place and secured it with the screws and reattached the new electrical harne... read more