Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RT18BKXKQ00

RT18BKXKQ00 Roper Refrigerator - Overview

Get Parts and Repair Help for RT18BKXKQ00

If you know the refrigerator repair part you need, you can browse the list of all parts on the RT18BKXKQ00, or you can search by name or part description. You can also find your part by where it is located on the RT18BKXKQ00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RT18BKXKQ00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RT18BKXKQ00

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$84.92

Icemaker

This kit includes everything needed to install the new icemaker. Note: This part has been updated by the manufacturer, it may differ in appearance but will still function the same as the original.

$11.43

Light Rocker Switch

This light switch is triggered by the door opening and closing.

$7.60

Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.

$4.67

End Cap Trim Piece

Sold individually.

$15.47

Fan Blade

Used with Evaporator Fan Motors.

$4.89

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$2.76

Screw

Sold individually.

$7.20

Touch-Up Paint - White

18ml

$5.54

Screw

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken elbow on icemaker water fill tube.

  • Customer: Charles from Orland Hills, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 105 of 115 people found this instruction helpful
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done. read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 62 of 74 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 51 of 58 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more