Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RT17DKXBL00

RT17DKXBL00 Roper Refrigerator - Overview

Get Parts and Repair Help for RT17DKXBL00

If you know the refrigerator repair part you need, you can browse the list of all parts on the RT17DKXBL00, or you can search by name or part description. You can also find your part by where it is located on the RT17DKXBL00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RT17DKXBL00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RT17DKXBL00

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 3 hrs and your part ships today!
$36.60

Handle End Cap Kit

This kit includes both upper and lower door handle end caps for both freezer and fresh food door handles. This is only available in chrome. All other colors are discontinued. Handle is NOT included. Handles must be ordered separately.

Order within the next 3 hrs and your part ships today!
$7.20

Touch-Up Paint - White

18ml

Order within the next 3 hrs and your part ships today!
$35.17

Light Socket Kit

The bulb is sold separately.

Order within the next 3 hrs and your part ships today!
$100.45

Fresh Food Door Gasket

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Order within the next 3 hrs and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 3 hrs and your part ships today!
$75.76

Door Handle Kit of 2 - Black

Almond and white handle no longer available. NOTE: As per the manufacture the handle may have to be cut to fit.

Order within the next 3 hrs and your part ships today!
$6.60

Touch-up Paint - Black

16ml

Order within the next 3 hrs and your part ships today!
$92.16

Temperature Control Thermostat Kit

This part keeps the refrigerator at a constant temperature.

$8.45

Insert Kit

This kit comes with two pieces.

Order within the next 3 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The frost free feature of the freezer was freezing over with ice and cooling coils were being insulated with thickening frost which caused the cooling air to rise in temperature from -5 degrees to 20 degrees.

  • Customer: Lawrence from Grahamsville, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 324 of 380 people found this instruction helpful
I troubleshot the problem by reading the electrical schematic and concluding the heating elements (defrost cables) were either defective or the bi-metal temp sensor was open. When closed the temp sensor completes the circuit for the current to flow through the heaters to defrost the cooling coils every 8 hours and then when the bimetal opens at 55 degrees t... read more

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 176 of 196 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 67 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more