Models > RT16DKYKT01

RT16DKYKT01 Roper Refrigerator - Overview

Get Parts and Repair Help for RT16DKYKT01

If you know the refrigerator repair part you need, you can browse the list of all parts on the RT16DKYKT01, or you can search by name or part description. You can also find your part by where it is located on the RT16DKYKT01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RT16DKYKT01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 53 mins and your part ships today!
$13.53

Defrost Timer Kit - 120V 60Hz

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number.

Order within the next 53 mins and your part ships today!
$5.55

Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.

Order within the next 53 mins and your part ships today!
$29.25

Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Order within the next 53 mins and your part ships today!
$8.59

Light Rocker Switch

This light switch is triggered by the door opening and closing.

Order within the next 53 mins and your part ships today!
$4.34

End Cap Trim Piece

Sold individually.

Order within the next 53 mins and your part ships today!
$18.39

Light Socket Kit

The bulb is sold separately.

Order within the next 53 mins and your part ships today!
$2.07

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

Order within the next 53 mins and your part ships today!
$5.05

Touch-Up Paint - White

18ml

Order within the next 53 mins and your part ships today!
$4.95

End Cap Trim - White

Order within the next 53 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 132 of 145 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Broken elbow on icemaker water fill tube.

  • Customer: Charles from Orland Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 85 of 93 people found this instruction helpful
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done. read more

Freezer Iced up, dripping water into refrigerator below

  • Customer: Robert from Bradenton FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 46 of 54 people found this instruction helpful
De-iced the refrigerator. Removed two screws from the thermostat panel on the upper refrigerator section. Tilted it down, removed two speed nuts holding the timer, unplugged the timer plug. Determined from the instruction sheet (easy to follow) what time delay function is used, based on wire colors, placed the jumper on the correct terminal on the new tim... read more