Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RT14WKYGW01

RT14WKYGW01 Roper Refrigerator - Overview

Get Parts and Repair Help for RT14WKYGW01

If you know the refrigerator repair part you need, you can browse the list of all parts on the RT14WKYGW01, or you can search by name or part description. You can also find your part by where it is located on the RT14WKYGW01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RT14WKYGW01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RT14WKYGW01

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 11 hrs and your part ships today!
$36.07

Handle End Cap Kit

This kit includes both upper and lower door handle end caps for both freezer and fresh food door handles. This is only available in chrome. All other colors are discontinued. Handle is NOT included. Handles must be ordered separately.

Order within the next 11 hrs and your part ships today!
$35.17

Light Socket Kit

The bulb is sold separately.

Order within the next 11 hrs and your part ships today!
$7.22

Touch-Up Paint - White

18ml

Order within the next 11 hrs and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 11 hrs and your part ships today!
$89.83

Fresh Food Door Gasket

This white door gasket is used to seal the fridge door when closed.

Order within the next 11 hrs and your part ships today!
$44.80

Compressor Relay and Overload

May differ in appearance, but functions same as original. The overload protects a motor from overheating and the relay boosts the compressor.

Order within the next 11 hrs and your part ships today!

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$6.80

Touch-up Paint - Black

16ml

Order within the next 11 hrs and your part ships today!
$77.77

Freezer Door Gasket

This door gasket is used to seal the freezer door when closed.

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken elbow on icemaker water fill tube.

  • Customer: Charles from Orland Hills, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 100 of 109 people found this instruction helpful
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done. read more

Fridge was warm. No air circulating at all. Food was spoiling Fridge was just over 1 year old

  • Customer: Brian from Smock, PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 79 of 90 people found this instruction helpful
First I removed the two screws that secure the guard in bottom back of the freezer and removed it . Next I removed the two screws that secure the guard on the back wall of the freezer and removed it. There are three wires connected to the motor, I unplugged those and removed the two screws that secure the motor and removed it. I swapped the grommets, blade a... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 66 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more