Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RST399UL (P1141267N L)

RST399UL (P1141267N L) Caloric Cooktop - Overview

Get Parts and Repair Help for RST399UL

If you know the cooktop repair part you need, you can browse the list of all parts on the RST399UL, or you can search by name or part description. You can also find your part by where it is located on the RST399UL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RST399UL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$46.04

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

$21.46

2 Piece Broiler Pan

The top of this part is now black.

$56.78

Spark Ignition Module with Bracket

This part comes with the mounting bracket.

$2.80

SCREW

Sold individually.

$33.42

Hinge Kit - Right Side

This hinge is located on the right side of the door.

$33.17

Hinge Kit - Left Side

$11.18

Clock Knob

This clock knob does not come with a tension spring insert.

$74.00

Surface Burners Spark Module Kit

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$63.67

GASKET- OV

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 57 of 61 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

2 of 4 burners wouldn't light

  • Customer: John from Alexandria, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 23 of 26 people found this instruction helpful
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one by one, put the sto... read more

pre- igniter went bad. No spark

  • Customer: Edward from Schaghticoke, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 21 people found this instruction helpful
The trick with any appliance is to remove all the extras,before you get to the problem.Considering that it has electricity, the first step was to turn it off.
After that it was a matter of removing the top burners,range knobs and locate the panel screws that secure it to the stove.Locate the part,remember the colors of where the wires go,remove,replace ... read more