Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RST380

RST380 Caloric - Overview

Parts and Repair Help for models starting with RST380

If you know the repair part you need, you can browse the list of all parts for models starting with RST380, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for RST380 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with RST380

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$46.04

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

$21.68

2 Piece Broiler Pan

The top of this part is now black.

$7.60

Set Button Knob

This set button knob is less than an inch long. It is all black in color and is made entirely of plastic.

$2.76

SCREW

Sold individually.

$34.76

Gas Burner Cap with Spark Electrode

This stainless steel surface burner cap assembly comes with a spark ignition electrode, and is used for some Maytag/Amana brand gas ranges and cooktops. Available only in the chrome finish you see here.

$39.65

LIGHT- OVE

This oven light assembly is a little over four inches long. It is a six hundred an sixty watt light bulb.

$31.51

Hinge Kit - Right Side

This hinge is located on the right side of the door.

$69.89

Surface Burners Spark Module Kit

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$31.40

Hinge Kit - Left Side

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 66 of 70 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

pre- igniter went bad. No spark

  • Customer: Edward from Schaghticoke, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 21 people found this instruction helpful
The trick with any appliance is to remove all the extras,before you get to the problem.Considering that it has electricity, the first step was to turn it off.
After that it was a matter of removing the top burners,range knobs and locate the panel screws that secure it to the stove.Locate the part,remember the colors of where the wires go,remove,replace ... read more

hard to get old one out

  • Customer: robert from chatham, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 28 of 64 people found this instruction helpful
easy to put in read more