Models > RST307/ALL

RST307/ALL (RST307/AL L) Caloric Cooktop - Overview

Get Parts and Repair Help for RST307/ALL

If you know the cooktop repair part you need, you can browse the list of all parts on the RST307/ALL, or you can search by name or part description. You can also find your part by where it is located on the RST307/ALL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RST307/ALL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.07

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 6 hrs and your part ships today!
$2.70

SCREW

Sold individually.

Order within the next 6 hrs and your part ships today!
$28.32

Hinge Kit - Right Side

This hinge is located on the right side of the door.

Order within the next 6 hrs and your part ships today!
$53.09

Surface Burners Spark Module Kit

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Order within the next 6 hrs and your part ships today!
$34.09

Gas Burner Cap with Spark Electrode

This stainless steel surface burner cap assembly comes with a spark ignition electrode .

Order within the next 6 hrs and your part ships today!
$27.21

Hinge Kit - Left Side

Order within the next 6 hrs and your part ships today!
$53.30

Gas Burner Grate

Sold individually.

Order within the next 6 hrs and your part ships today!
$29.39

Gas Spark Ignition Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

Order within the next 6 hrs and your part ships today!
$5.17

Screw

Sold individually.

Order within the next 6 hrs and your part ships today!
$126.10

Gas Valve

This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

pre- igniter went bad. No spark

  • Customer: Edward from Schaghticoke NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 11 of 17 people found this instruction helpful
The trick with any appliance is to remove all the extras,before you get to the problem.Considering that it has electricity, the first step was to turn it off.
After that it was a matter of removing the top burners,range knobs and locate the panel screws that secure it to the stove.Locate the part,remember the colors of where the wires go,remove,replace ... read more

gas burners and gas oven would not light

  • Customer: nicholas from livermore CA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 7 of 9 people found this instruction helpful
unplug the oven and pull it away from the wall. looking at the oven from the back, the spark module is at the bottom on the lower left. there is a two piece sheetmetal cover over the area of the spark module. use a phillips head screwdriver to remove five screws and the covers come off. the spark module is the blue cube with four push on wire connectors.... read more

oven door would fall off when you opened it

  • Customer: Arthur from Ridgewood NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 7 people found this instruction helpful
left side hinge was broken. I removed 2 screws to release the old hinge and replaced it with the new hinge.
Part select.com made it easy to pick out the part from the diagram supplied on the web site. After it was ordered it arrived 2 days later. read more