Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RSS359-OF

RSS359-OF (RSS3590OF) Caloric Cooktop - Overview

Get Parts and Repair Help for RSS359-OF

If you know the cooktop repair part you need, you can browse the list of all parts on the RSS359-OF, or you can search by name or part description. You can also find your part by where it is located on the RSS359-OF by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$46.04

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

$7.48

Square Chrome Drip Pan (sides measuring 7-3/4" each)

This square chrome drip pan is intended for use with gas ranges. With a 4 inch diameter center hole and 7-3/4 inch sides, this pan is dishwasher safe and comes one to a package.

$30.60

Hinge Kit - Right Side

This hinge is located on the right side of the door.

$11.18

Clock Knob

This clock knob does not come with a tension spring insert.

$24.02

Burner Knob

Sold individually.

$56.30

Gas Burner Grate

This gas burner grate is used for some gas ranges and cooktops. This is a black burner grate with each side measuring almost eight inches.

$32.00

Gas Spark Ignition Switch

This burner ignition switch is a little over an inch long. It is made of plastic and has a white center cam. This switch has some metallic components.

$41.90

IGNTR-SURF

Gas Valve

This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

KNOB, SELECTOR ASSY

This selector knob is two inches in diameter. It is black in color and is made of plastic. This knob will accept a 'D' shaped shaft, and it has white lettering denothing the off, clean, broil, timed bake, and bake positions.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 66 of 70 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

pre- igniter went bad. No spark

  • Customer: Edward from Schaghticoke, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 21 people found this instruction helpful
The trick with any appliance is to remove all the extras,before you get to the problem.Considering that it has electricity, the first step was to turn it off.
After that it was a matter of removing the top burners,range knobs and locate the panel screws that secure it to the stove.Locate the part,remember the colors of where the wires go,remove,replace ... read more

Oven ignitor stopped working (does this every 6-7 years)

  • Customer: Jean from Manalapan, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 10 of 11 people found this instruction helpful
First we removed the oven doors. Then removed the shelf that separates the oven from the broiler, giving us more room to work. At first we thought we needed to loosen the screws around the bracket holding the ignitor, but we realized that the burner needed to be removed. Lifting the burner up from the front gave us the room to pull it gently from the back... read more