Models > RSS358UWG (P1141232N W)

RSS358UWG (P1141232N W) Caloric Cooktop - Overview

Get Parts and Repair Help for RSS358UWG

If you know the cooktop repair part you need, you can browse the list of all parts on the RSS358UWG, or you can search by name or part description. You can also find your part by where it is located on the RSS358UWG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RSS358UWG parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 11 hrs and your part ships today!
$4.64

Screw

Sold individually.

Order within the next 11 hrs and your part ships today!
$50.10

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

Order within the next 11 hrs and your part ships today!
$18.07

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 11 hrs and your part ships today!
$2.70

SCREW

Sold individually.

Order within the next 11 hrs and your part ships today!
$28.32

Hinge Kit - Right Side

This hinge is located on the right side of the door.

Order within the next 11 hrs and your part ships today!
$37.43

Oven Light

This oven light assembly is a little over four inches long. It is a six hundred an sixty watt light bulb.

Order within the next 11 hrs and your part ships today!
$64.59

Spark Ignition Module with Bracket

This part comes with the mounting bracket.

Order within the next 11 hrs and your part ships today!
$27.21

Hinge Kit - Left Side

Order within the next 11 hrs and your part ships today!
$10.96

Clock Knob

This clock knob does not come with a tension spring insert.

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 45 of 47 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

2 of 4 burners wouldn't light

  • Customer: John from Alexandria VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 23 people found this instruction helpful
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one by one, put the sto... read more

Spark did not ignite one burner and sometimes two

  • Customer: Frederick from Eagle WI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 13 people found this instruction helpful
I could not figure out how to get to the igniter until I went to the "Part Select" web site and found a post that was exactly like the problem that I had. IE: Remove two screws holding each burner, Lift off top, remove old igniter being "Carefull" not to mix up the wires when putting them on the new one, installed new igniter in bracket and mounted in positi... read more