Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RSS343

RSS343 Caloric Range - Overview

Get Parts and Repair Help for RSS343

If you know the range repair part you need, you can browse the list of all parts on the RSS343, or you can search by name or part description. You can also find your part by where it is located on the RSS343 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$46.04

Flat Style Oven Igniter

The flat style oven igniter is also known as a range oven igniter. The function of this part is to glow extremely hot in order to ignite the gas for the oven burner. With this flat...

Order within the next 5 hrs and your part ships today!
$33.03

Hinge Kit - Right Side

The hinge kit, or oven door hinge, is used in ranges and wall ovens. The hinge attaches to the right side of the door and controls how fast the door opens. At a specific angle, it allows the door to remain open. If you are having trouble opening and closing your door, or it does not close at all, replacing the hinge could solve your problem. The hinge is made from metal and the kit comes with the hardware needed for this installation. You will need a screwdriver to perform this repair. *Please note: This part is only for the right side of your appliance. The left side is sold separately.

Order within the next 5 hrs and your part ships today!
$11.29

Clock Knob

This clock knob does not come with a tension spring insert.

Order within the next 5 hrs and your part ships today!
$45.75

IGNTR-SURF

Order within the next 5 hrs and your part ships today!
$23.91

Burner Knob

Sold individually.

Order within the next 5 hrs and your part ships today!
$46.50

Gas Spark Ignition Switch

This burner ignition switch is a little over an inch long. It is made of plastic and has a white center cam. This switch has some metallic components.

Order within the next 5 hrs and your part ships today!

Gas Valve

This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

KNOB, SELECTOR ASSY

This selector knob is two inches in diameter. It is black in color and is made of plastic. This knob will accept a 'D' shaped shaft, and it has white lettering denothing the off, clean, broil, timed bake, and bake positions.

$8.10

Screw

Sold individually.

Order within the next 5 hrs and your part ships today!

Top Burner

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 69 of 73 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

pre- igniter went bad. No spark

  • Customer: Edward from Schaghticoke, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 21 people found this instruction helpful
The trick with any appliance is to remove all the extras,before you get to the problem.Considering that it has electricity, the first step was to turn it off.
After that it was a matter of removing the top burners,range knobs and locate the panel screws that secure it to the stove.Locate the part,remember the colors of where the wires go,remove,replace ... read more

Oven ignitor stopped working (does this every 6-7 years)

  • Customer: Jean from Manalapan, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 10 of 11 people found this instruction helpful
First we removed the oven doors. Then removed the shelf that separates the oven from the broiler, giving us more room to work. At first we thought we needed to loosen the screws around the bracket holding the ignitor, but we realized that the burner needed to be removed. Lifting the burner up from the front gave us the room to pull it gently from the back... read more