Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RSS307

RSS307 Caloric - Overview

Parts and Repair Help for models starting with RSS307

If you know the repair part you need, you can browse the list of all parts for models starting with RSS307, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for RSS307 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with RSS307

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 5 hrs and your part ships today!
$46.04

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

Order within the next 5 hrs and your part ships today!
$33.42

Hinge Kit - Right Side

This hinge is located on the right side of the door.

Order within the next 5 hrs and your part ships today!
$11.18

Clock Knob

This clock knob does not come with a tension spring insert.

Order within the next 5 hrs and your part ships today!
$63.67

GASKET- OV

Order within the next 5 hrs and your part ships today!
$24.84

Burner Knob

Sold individually.

Order within the next 5 hrs and your part ships today!

Gas Valve

This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

KNOB, SELECTOR ASSY

This selector knob is two inches in diameter. It is black in color and is made of plastic. This knob will accept a 'D' shaped shaft, and it has white lettering denothing the off, clean, broil, timed bake, and bake positions.

$35.78

Gas Valve Burner Orifice - #58 LPG

Order within the next 5 hrs and your part ships today!

USE WPL Y0060712

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 57 of 61 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

pre- igniter went bad. No spark

  • Customer: Edward from Schaghticoke, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 21 people found this instruction helpful
The trick with any appliance is to remove all the extras,before you get to the problem.Considering that it has electricity, the first step was to turn it off.
After that it was a matter of removing the top burners,range knobs and locate the panel screws that secure it to the stove.Locate the part,remember the colors of where the wires go,remove,replace ... read more

hard to get old one out

  • Customer: robert from chatham, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 27 of 61 people found this instruction helpful
easy to put in read more