Models > RSD379

RSD379 Caloric Range - Overview

Get Parts and Repair Help for RSD379

If you know the range repair part you need, you can browse the list of all parts on the RSD379, or you can search by name or part description. You can also find your part by where it is located on the RSD379 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$54.31

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

$9.11

Drip Pan

$27.77

Hinge Kit - Right Side

$17.55

Light Blub - Fluorescent - 18 Watt

$26.62

Hinge Kit - Left Side

$12.23

Flourescent Lamp

$26.39

IGNTR-SURF

Clock Knob

This clock knob is less than an inch long. It is black in color and is made of plastic. This knob has a piece of decorative chrome on its top.

SWITCH, SELECTOR

LENS, OVEN LIGHT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 37 of 37 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

Oven ignitor stopped working (does this every 6-7 years)

  • Customer: Jean from Manalapan NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 8 of 9 people found this instruction helpful
First we removed the oven doors. Then removed the shelf that separates the oven from the broiler, giving us more room to work. At first we thought we needed to loosen the screws around the bracket holding the ignitor, but we realized that the burner needed to be removed. Lifting the burner up from the front gave us the room to pull it gently from the back... read more

my oven took for ever to light after a while it didn't

  • Customer: joseph from wyandotte MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 6 of 6 people found this instruction helpful
i disconnected the power supply, took all shelves out of oven, removed screw that holds the bunner to oven, removed bunner along with igniter. cut wires to igniter wired new igniter , tested before
installing bunner,( ok) installed bunner and screw
fired up and all is well. read more