Models > RS776G*01

RS776G*01 Hotpoint Range - Overview

Get Parts and Repair Help for RS776G*01

If you know the range repair part you need, you can browse the list of all parts on the RS776G*01, or you can search by name or part description. You can also find your part by where it is located on the RS776G*01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RS776G*01 [Viewing 2 of 2]

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$19.26

Bake Element

This closed hinged-style bake element has screw in terminals.

$6.12

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with looped terminal style surface mount burner element units.

$9.60

Terminal Block Assembly

This ceramic terminal block kit includes one ceramic block and terminal assembly with mounting bracket. Terminal blocks generally provide an easy solution for connecting individual wires.

$7.32

Drip Bowl - 8"

Sold individually.

$28.39

Surface Element - 8"

This part fits most ranges where a ceramic terminal block is used.

$5.55

Oven Light Socket - With Push In Receptacle

$1.34

Screws - Package of 12

$23.07

Surface Element - 6" - 1325W

$4.41

Light Cover

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The lower bake element burned out.

  • Customer: Carlos from Southaven MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 32 of 36 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!

It worked. What was really cool, once I ordered the part, I received it in only two work days!

Good job folks! read more

Replaced lower element in GE Spectra range.

  • Customer: Phillip from Greeneville TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 15 of 22 people found this instruction helpful
Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins! read more

Large burner would operate on high setting only.

  • Customer: Ernest from Bellevue NE
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 10 of 12 people found this instruction helpful
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel. read more