Models > RS744GP3BG

RS744GP3BG Hotpoint Cooktop - Overview

Get Parts and Repair Help for RS744GP3BG

If you know the cooktop repair part you need, you can browse the list of all parts on the RS744GP3BG, or you can search by name or part description. You can also find your part by where it is located on the RS744GP3BG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RS744GP3BG parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RS744GP3BG [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.99

Bake Element

This partially open-style bake element comes with push-on terminals and is located on the bottom of the oven.

$4.27

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

$30.93

Surface Element - 8" - 2350W

$89.55

Oven Sensor

This sensor detects the temperature within the oven cavity.

$22.97

Surface Element - 6" - 240V

This Y-frame six inch surface burner element has five turns and a metallic center medallion.

$4.65

Surface Burner Drip Bowl - 6"

This chrome drip bowl is sold individually.

$7.36

Surface Burner Drip Bowl - 8"

$29.82

Hinge with Roller - Right Side

$45.50

Surface Burner Terminal Block Kit

This kit comes with the terminal block, mounting clip and wires.

$34.18

Hinge with Roller - Left Side

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven took 30 minutes to get to 380 degrees-no hotter

  • Customer: Sandra from Hayward CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 368 of 370 people found this instruction helpful
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who had already done it. ... read more

Bake element burned out

  • Customer: Laura from N. Little Rock AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 185 of 251 people found this instruction helpful
I turned off the power to the oven at the breaker. Then I removed the two screws from the old element, pulled the old element out about 3 inches and disconnected the wires from the element and installed the new one. read more

Oven tempature was approximately 150 degrees to low

  • Customer: James from Austin TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 131 of 154 people found this instruction helpful
This repair is EASY if you know how to use an ohm meter. If not, seek help for this step.

SYMPTOM:
The oven (JKP27WOP3WG or JKP27WP3WG and many ovens like it ) was not getting hot enough. Verifying the cooking temperature with an typical oven thermometer, I was able to determine that the oven was cooking temperature was about 150 degrees t... read more