Models > RS647G*J6

RS647G*J6 Hotpoint Range - Overview

Get Parts and Repair Help for RS647G*J6

If you know the range repair part you need, you can browse the list of all parts on the RS647G*J6, or you can search by name or part description. You can also find your part by where it is located on the RS647G*J6 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RS647G*J6 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RS647G*J6 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$23.21

Bake Element - 240V 2300W

This closed, hinged style bake element with screw in terminals is 15-1/4" long and 18-1/4" wide. The depth of the terminals is 2-1/2".

$2.92

Trim Ring - 6"

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$3.80

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

$3.51

Trim Ring - 8"

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$6.00

Drip Bowl - 8"

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$42.08

Tilt Lock Hinge Mounted Surface Unit - 8"

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

$11.54

Timer Knobs - Kit of 3

$25.54

Tilt Lock Hinge Mounted Surface Element - 6"

This tilt lock hinge mounted surface element kit includes a 6 inch, two wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bottom heating element went out

  • Customer: Michael from Saint Paris OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 359 of 362 people found this instruction helpful
This repair took between 15 and 30 minutes BUT ONLY because my 10 year old son did the repair. He couldn't wait for his father to come home from work. His only complaint was the tight fit to reach the back of the oven (he wanted to take the oven door off but I said no). He removed the 2 screws that held the element in place and then pulled it from the ove... read more

Oven heating element was broken.

  • Customer: Phyllis from Fisk MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 251 of 324 people found this instruction helpful
The heating element in the lower oven of my 18 year-old GE double oven broke into two pieces and would not heat. Because of the age of the oven, a replacement part was unavailable through GE. I came across PartSelect.com through an Internet search and ordered the part online. Total cost was $33.50, counting s/h. FedEx delivered the new element less than 4... read more

The oven element had broken in half and was sparking

  • Customer: Brittany from Cayce SC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 112 of 175 people found this instruction helpful
I am not a handy person so I was really nervous about doing this. I first unplugged the oven just to be on the safe side. Then I removed the two screws that hold the element in place. Next I pulled the element forward and disconnected the two wires. After that I simply reconnected the two wires to the new element, pushed it back in and put the screws in.... read more