Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RS2630WW/XAA

RS2630WW/XAA Samsung Refrigerator - Overview

Get Parts and Repair Help for RS2630WW/XAA

If you know the refrigerator repair part you need, you can browse the list of all parts on the RS2630WW/XAA, or you can search by name or part description. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

TRAY ICE;AD,PP,-,-,-,-,N

The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for ...



This is a refrigerator ice dispenser lever. It is clear and made entirely out of plastic. The function of the ice dispenser lever is to dispense ice when the lever is pushed. If the lever is cracked or broken, it may no longer dispense your ice. This dispenser has a built-in ice dispenser chute to guide the ice out of the dispenser into your cup. Be sure to shut the ice maker off or disconnect power to the refrigerator so that ice does not dispense during the repair. This is a genuine replacement part from the original manufacturer.


Fan Blade Assembly


Condenser Fan Motor with Bracket

This fan motor is compatible with most frost-free Samsung refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan. If the condenser fan motor is not working properly, your freezer or refrigerator will not cool properly. Another symptom of a faulty or malfunctioning condenser fan motor is that the refrigerator cycles longer than usual. NOTE: This part includes the motor bracket and wire harness. Blade must be ordered separately.













Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lever Dispenser-Ice Was Broken.

  • Customer: RUSSELL from LAS VEGAS, NV
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Using the putty knife, pry off the faceplate for the ice/water dispenser. Disconnect the wire harness. Using philips head screwdriver, remove the dispenser assembly. Remove the old dispenser and replace. Reverse for reassembly. Note * I should have bought the water dispenser lever and replaced it as well since I had the assembly out. Secondary note * b... read more