Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RS2630SH/XAA

RS2630SH/XAA Samsung Refrigerator - Overview

Get Parts and Repair Help for RS2630SH/XAA

If you know the refrigerator repair part you need, you can browse the list of all parts on the RS2630SH/XAA, or you can search by name or part description. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.09

TRAY ICE;AD,PP,-,-,-,-,N

Order within the next 22 mins and your part ships today!
$54.36

Condenser Fan Motor with Bracket

This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan. NOTE: Blade must be ordered separately.

Order within the next 22 mins and your part ships today!
$7.20

LEVER DISPENSER-ICE;AD,A

Order within the next 22 mins and your part ships today!
$5.63

Fan Blade Assembly

Order within the next 22 mins and your part ships today!
$115.27

Control Module Assembly -115V

Order within the next 22 mins and your part ships today!
$2.96

CASTER-FRONT;AW-PJT,PP,-

Order within the next 22 mins and your part ships today!
$2.06

CAM-HINGE RISER LOW;USP0

Order within the next 22 mins and your part ships today!
$2.06

GROMMET-MOTOR;-,NBR,-,-,

Order within the next 22 mins and your part ships today!
$13.87

RELAY PROTECTOR O/L;4TM4

Order within the next 22 mins and your part ships today!
$11.22

FIXER-SENSOR(ICE MAKER);

Order within the next 22 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lever Dispenser-Ice Was Broken.

  • Customer: RUSSELL from LAS VEGAS, NV
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Using the putty knife, pry off the faceplate for the ice/water dispenser. Disconnect the wire harness. Using philips head screwdriver, remove the dispenser assembly. Remove the old dispenser and replace. Reverse for reassembly. Note * I should have bought the water dispenser lever and replaced it as well since I had the assembly out. Secondary note * b... read more