Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RS2555SL/XAA

RS2555SL/XAA Samsung Refrigerator - Overview

Get Parts and Repair Help for RS2555SL/XAA

If you know the refrigerator repair part you need, you can browse the list of all parts on the RS2555SL/XAA, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?







Fan Blade Assembly













This is a refrigerator ice maker assembly and it is 120 volts. The kit includes the complete ice maker and housing, and will require assembling multiple parts. The main reason for needing to use this assembly to replace your part is if your ice maker is broken and stops making ice. To complete this installation, you will need a Phillips screwdriver; the harness is included in the assembly. Before making this repair, make sure to unplug your appliance from the electrical source. To replace this piece, you will need to remove your ice bin from your freezer.

Common Symptoms of the RS2555SL/XAA

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Original manufacturers plastic part cracked

  • Parts Used:
  • NLA
  • Customer: Jeremy from Grand Rapids, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 6 people found this instruction helpful
Removed 2 screws, popped out the old part. Looked at the part number on the piece. Ordered and when it arrived 3 days later, I put the new part in its place. Works great. read more

Refrigerator Temperature Blinking

  • Customer: Christopher from Queen Creek, AZ
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I removed all of the internal shelves from the refrigerator side. I then removed the cooling panels from the bottom area. this exposed the fan assembly and cooler. I found ice all over the unit. I had to unplug the refrigerator and used a hair dryer to melt the ice away. I then found the sensor and replace it. After putting the refrigerator back together, I ... read more

Refrigerator side wasn't cooling properly. Was staying at 55 degrees.

  • Customer: Robert from Simi Valley, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Took off the plastic panel in the interior. As usual, the evaporator was completely iced up. Took most of the time to de-ice it with a heat gun. Tested the components and the temperature sensor was bad which is on the top end of the evaporator fins. The ohms test wasn't any different whether hot or cold. I keep a spare sensor on hand because this is the thir... read more