RS22BRXDN00 Roper Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Auger drum broke
Removed ice bin and separated parts. However, instructions would have been nice that the part to unscrew was the opposite of normal screws. Not righty-tighty, but righty remove. After I figured that out, disassembly, reassembly, and installation went smoothly. It was a pleasure to deal with your company!
Parts Used:
-
Ed from Thurmont, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
stopped making ice
Removed flap and three screws holding tray. one screw holding plug protector. Slid tray out and unplugged . Removed three screws holding control & motor assembly.Put new unit in reassembled.
Parts Used:
-
Richard from DeBary, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Failure to make ice.
Watched video on Part Select, ordered part,it arrived in three days installed same fifteen minutes had ice within one hour.Saved $300.00.Thanks Part Select.
Parts Used:
-
Thomas J from Jackson, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Feeder drum in icemaker broken
We used the video out on YouTube to show us how to replace the drum. It made the repair go so fast that we were amazed that two klutzes could do this repair! Remove the screws that hold the housing together. Place the screws in a cup to keep everything together. Remove the spiral unit and the plastic sleeve. The hardest part was removing the auger nut on the assembly. Just remember it is a left hand turn. After that, remember sequence of the blade assembly. The video suggested that you take a picture and that would help remembering the sequence of the blades. Follow the video!
Parts Used:
-
Bonnie from New Freedom, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice machine stopped making ice
Replaced with new ice machine. Three screws to take out ice machine, took off water lines put new one in. Could not be easier.
Parts Used:
-
David from Rialto, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
non functioning light switch in fridge
This repair was super easy. there are only 5 screws to remove to get at the defective switch. 3 in the housing where the light bulbs are and 2 in the front trim piece where the cooling adjustment dials are. I never did unplug the fridge ,but probably should have although nothing bad happened. I removed all 5 screws using a 1/4" socket ( a nutdriver would work well also). there is also a small dia rod that comes down from the coolness adj. wheel that when you re-assemble goes though the middle of the wheel. The switch has only 2 wires that clip on with the push on flat type connectors. Very simple. I removed the wires and then the switch can be removed( it is only held in by 2 squeezable side clips). I put the new switch in and connected the wires , checked to see that the lights went on and off. which they did. then just put the screws back in.....done. also I would like to say that when I ordered my switch it came super fast. I ordered it online at 11:00am on a tuesday and it was on my doorstep in wisconsin by 10:00 am the next day...Thanks
Parts Used:
-
martin from grafton, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Fridge kept turning off.
Just replaced the thermostat and is working perfectly. I would have to tap cooler knob and it would kick on. when it ran it ran well. So i knew it had to be electrical.Put in new thermostat and is working great!
Parts Used:
-
Mark from Lawerenceburg, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator/Freezer would not maintain temperature
Watched the video, followed the instructions, took my time and paid attention to what came off where, and viola. Not quite as easy as the guy in the video, but then it was my first time! Bottom line is: it worked. Refrigerator/freezer now maintains temperature exactly as expected, and I saved hundreds. Thank you!
Parts Used:
-
Jonathan from Jacksonville, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker stopped cycling
Did troubleshooting as manuel indicated. Had same problem once before. The replacement did the trick.
Parts Used:
-
Milt from Littleton, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice bin auger drum was broken
I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.
Parts Used:
-
Terry from Glassboro, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Icemaker stopped making ice.
I watched the video provided on your website and followed the directives. It was just as easy and simple as noted in the video.
Parts Used:
-
Luz E from Crystal Lake, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Replaced Ice Bin Auger Drum
Before purchasing the part, I watched the ParSelect installation video. The video gave me the insight as to my ability to replace the part and the correctness of the part for my ice bin. The video made it extremely easy and quick to replace the auger drum (propeller looking thing that pushes out the ice).
Parts Used:
-
Charles from Williamsburg, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Blades broke inside drum
removed the ice maker and removed all the parts to see what was needed. Only needed the drum. Very easy to do yourself and received the part very quick. Completed the job in about four days due to waiting on part. The work to take apart and put back together about one hour.
Parts Used:
-
gilbert from Columbus, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making ice.
The small arm in the tray for the ice maker stopped moving. I put hot water in there to see if anything was clogging up the line or the tray, but nothing was. I then pushed on the arm and it moved pretty easily. So I took off the front cover and the motor; I saw that the plastic piece connecting to the gear was broken. So I realigned and replaced the motor. Ice maker is working like a champ again.
Parts Used:
-
Russell from Sedro Woolley, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator side of side by side was freezing food
We bought the fridge used and immediately see why it was being sold. But ordered a new thermostat and with Part Select's instructional video was able to replace the thermostat. I should mention it was my first attempt making any repairs to a refrigerator. It was fairly straightforward project.
Parts Used:
-
Doug from OKLAHOMA CITY, OK
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!