Models > RS22BRXBL01 > Parts

RS22BRXBL01 Roper Refrigerator - Parts

All parts for the Roper Refrigerator RS22BRXBL01

Below is a list of all parts for the Roper Refrigerator RS22BRXBL01 - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RS22BRXBL01
1-14 of 292
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. Its harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.


Door Cam - Black

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.


Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.


Bi-Metal Defrost Thermostat

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.


Ice Bin Auger Drum

This white ice bin auger drum comes with a washer.


Thermostat Assembly

The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.



This screw is sold individually.


Door Closing Cam Kit

This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in pos...


Micro Switch

This switch is located inside the dispenser.


Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air ...


Single Water Inlet Valve - 120V 60Hz 35W

Also known as a Water Solenoid Valve. The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.


Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.


Shelf Support Stud

Sold individually.

All Parts for the RS22BRXBL01
1-14 of 292