Below is a list of all parts for the Roper Refrigerator RS22BRXAW00 - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
Note: As per manufacture a new screw is needed to mount door cam.
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
This white ice bin auger drum comes with a washer.
The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.
Also known as a Water Solenoid Valve.
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into th...
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.
This kit comes with a fill tube and a compression nut.
This screw is sold individually.
This kit contains two options - One that is a push and turn and the other that is a screw in.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.