RS22AWXEW01 Roper Refrigerator - Instructions

Replacement was quite easy. Video was helpful as to how to get all pieces back on the shaft correctly. Was easy to find the correct part and was shipped quickly.

Pulled out old drawer. Slid in new drawer. Super easy!

I have an Amana freeze and I followed the procedure in the video. Which is very good! However on the Amana Model there two slight differences in the procedure that I felt I needed to do. The first one is, the condenser fan bracket is attached to the Freezer chassis with 4 screws, not three. The removal and installation of the back screw by the fan is a bear. I removed the other three and it allowed me to rotate the fan slightly to get more access to the fourth and did same on installation by just starting the 4th screw and then tightening it later. The second issue was my new fan hit the housing when I spun the fan. When I looked at the old one. It had a phenolic washer, between the fan and motor which spaces the fan out about a washer thickness from the motor. When I tried to remove the old one it broke in four pieces due to age. So, I made my own with a washer that I super glued to the motor housing after carefully centering it on and clearing the motor shaft . Seemed to work with out any more noise or balance issues...Thanks, your delivery was blindly fast and video was great!

Repaired as in your video on replacing the ice maker. Excellent.

I ordered a new micro switch to do the repair. When I took face plate off the front of door two pieces of broken plastic fell out. Those pieces were part of what holds the switch in place, I need to order that part but I was able to use small tie wraps to hold switch in place and it has been working for a week now. The videos on this site are very helpful and gave me confidence to do the repair.

Pulled out old draw and inserted new one

I had already removed the ice container & realized the very end of the auger (drum) was broken. I still don't know why this part is plastic. I ordered the auger drum on Monday & received the part Wednesday morning by Fedex. I then retrieved your repair video by Steve on-line and paused it as I duplicated each step. The process was really very easy (I even surprised myself). The unit now works as it did when new. To think I went for over a month and the repair was so simple and inexpensive. Thanks also to your customer service rep who put my mind at ease that this was the correct part (My auger was totally plastic & different from the one in the illustration). He said if my model number said this part would fit, then it would and it did.

I have some electronics background but your listed problems helped me narrow down the problem. I ordered the part, removed old part, installed new part (maybe 15 minutes total) and my icemaker started dumping the ice that was in the tray within 20 minutes and making more. That clunking sound of ice was music to me ears and wallet!! Thanks!!

I called a repair man out to see what the problem was because my husband just died and I didn't want to pay such high prices for a repair. He told me I needed a new motor for the ice maker and it would be a total of about 305.00. I couldn't believe the price. It cost me 59.99 for his diagnosis. I went to your web site and found the part and watched you installation video. I am 65 years old and I was able to install the new part in less than 15 min. The part was about 95.00. I saved 150.00 by doing it myself. I will always look on line before I have a repair man do a job. I may need them to diagnose the problem, but I will try myself before paying such outrageous fees.

Watched the trouble shooting & installation videos , checked to make sure water was getting to the door. I look'ed closely at the entire unit. Every thing seem'ed to be ok. I made a guess as to which part to order. The control motor or the thermostat. The control motor made more sense to me. I made the right guess. Works like new.

I followed directions to take off the front of the water and ice maker then I saw the switch but I found out the plastic piece that held it in place was broke. I didn't order a new piece I used my reliable super duper quick glue and put the broken pieces to geter then put switch in place. then volla I had the water running like it did before. Thank you for telling me how to get the front off. That was the life saver.

Be gentle when installing new plastic crisper drawer. If possible, read install instructions in Refrigerator Owner Booklet. Put new crisper drawer in position and gently push in until you are stopped by encountering the "stops" in side-support rails that are attached permanently to walls of refrigerator. Per Owner Booklet, lift new crisper drawer up slightly to pass over the "stops", then let the crisper drawer settle back down and push it in the rest of the way. Removal is reverse procedure. Be gentle!

I took the ice bin and crusher down to find the problem. I needed a new auger. I did a Google search for the part and found instructions for taking the crusher mechanism apart. This went smoothly until I went to put it back together. I had to follow the instructions in reverse which was really difficult. I advise folks to use their cell phone camera to take close up pictures of the dismantling process . Use these to help you put it back together. All in all, I was very pleased and plan to return when another need arises. John (retired x 2)

Just like the video I watched online at your web site. piece of cake.!!

Upon arrival I unpacked drawers and set in their location